All Xirgo Products

A 4TB removable 2.5" SATA solid state drive for the CRX-S. The drive slots into the recorder's removable caddy, so evidence can be pulled from a ve...

A 2TB removable 2.5" SATA solid state drive for the CRX-S. The drive slots into the recorder's removable caddy, so evidence can be pulled from a ve...

A 1TB removable 2.5" SATA solid state drive for the CRX-S. The drive slots into the recorder's removable caddy, so evidence can be pulled from a ve...

A 64GB SDHC card for the CP4S and CRX-S. Storage capacity determines how long a system records before overwriting, so sizing it to your retention r...

A 32GB SD card for the CP4S and CRX-S. Storage capacity determines how long a system records before overwriting, so sizing it to your retention req...

A 1TB SDHC card for the CP4S. Storage capacity determines how long a system records before overwriting, so sizing it to your retention requirement ...

A 512GB SDHC card for the CP4S. Storage capacity determines how long a system records before overwriting, so sizing it to your retention requiremen...

A 256GB SDHC card for the CP4S. Storage capacity determines how long a system records before overwriting, so sizing it to your retention requiremen...

A 128GB SDHC card for the CP4S and CRX-S. Storage capacity determines how long a system records before overwriting, so sizing it to your retention ...

A 256GB micro SD card for the KP2. Storage capacity determines how long a system records before overwriting, so sizing it to your retention require...

A 128GB micro SD card for the KP2. Storage capacity determines how long a system records before overwriting, so sizing it to your retention require...

A 64GB micro SD card for the KP2. Storage capacity determines how long a system records before overwriting, so sizing it to your retention requirem...

The LX40 Series is a scriptable vehicle telematics platform rather than a fixed-function tracker. Over 500 controllable parameters mean device beha...

The LX40 Series is a scriptable vehicle telematics platform rather than a fixed-function tracker. Over 500 controllable parameters mean device beha...

The LX40 Series is a scriptable vehicle telematics platform rather than a fixed-function tracker. Over 500 controllable parameters mean device beha...

The LX40 Series is a scriptable vehicle telematics platform rather than a fixed-function tracker. Over 500 controllable parameters mean device beha...

The XT53 is a battery-powered asset tracker with no wiring and no maintenance. A 19 Ah lithium thionyl chloride cell gives up to seven years of lif...

A combined road and driver-facing camera in a single housing, giving two channels from one mounting point and one cable run. Useful where recorder ...

The SVA050-A driver-facing camera supplied as a complete kit with its extension cable. Windshield mounted with the supplied 3M adhesive pad, with 6...

A compact driver-facing camera for CP4S and CRX-S systems, mounted to the windshield with the supplied 3M adhesive pad. At 103g it is the lightest ...

The SVA045-AM road-facing camera supplied as a complete kit with its extension cable. Windshield-mounted with 3M VHB tape for fast installation, wi...

A windshield-mounted road-facing camera for CP4S and CRX-S installations, giving the forward view that anchors any multi-camera configuration. Moun...

The SVA037-A mirrored rear-view camera supplied as a complete kit with its extension cable. Built for reversing and backup applications on the bump...

A mirrored rear-view camera for reversing and backup applications, mounted on the bumper or above the rear doors. The mirrored image means the driv...

The SVA035-A side and rear camera supplied as a complete kit with its extension cable. The 1.3MP Sony sensor and 120° lens cover the blind spot alo...

A side and rear add-on camera built for the mirror arm and sidewall positions on heavy commercial vehicles. The 1.3MP Sony sensor and 120° lens cov...

A mini dome camera for interior monitoring of cargo areas and passenger cabins. The low-profile dome housing sits flush against the ceiling where i...

The SVA027-A weatherproof side-view camera supplied as a complete kit with its extension cable. Rated IP69K against high-pressure washdown, it is t...

A weatherproof side-view camera for exterior mounting on the sidewall or mirror arm of commercial vehicles. Rated IP69K against high-pressure washd...

An external 4G/LTE/3G MIMO antenna with a 2.5m cable, for installations where the recorder sits somewhere the signal cannot reach. IP67 weather-res...

The power cable and harness for the CRX-S. One ships in every CRX-S box; order here as a replacement or a spare where the original was shortened or...

The digital I/O and video output cable for the CRX-S, carrying the monitor feed and the alarm trigger lines that drive automatic camera channel swi...

A four-camera wiring harness for the CRX-S using 4-pin Type B connectors. The CRX-S supports eight cameras and ships with two of these harnesses; o...

The Aviator wiring loom for the CRX-S. The recorder ships with Type B camera inputs as standard, so if you are carrying over legacy Aviator cameras...

A USB Wi-Fi modem for the CRX-S. For return-to-base fleets, this offloads event video when the vehicle comes back to a covered depot, removing the ...

A supercapacitor and battery backup that gives the CRX-S enough power to shut down cleanly when vehicle power is cut. Without it, an abrupt power l...

An external case for the USB LTE modem used with a CRX-S, supplied with a USB cable and two 3M adhesive pads. It lets the modem mount away from the...

The external GPS and GLONASS module for the CRX-S, housed in a weatherproof case for exterior mounting where cab glass or bodywork would block rece...

A 4G LTE USB modem that adds cellular connectivity to a CRX-S, enabling real-time event notification and remote video access. North American bands....

The high-capacity CRX-S configuration, shipping with a 2TB removable SSD for fleets that need longer continuous retention across all eight channels...

The CRX-S is Xirgo's 8-channel mobile NVR for vehicles that need more coverage than a four-camera system can give. Built for municipalities, school...

A replacement 3M adhesive pad for SVA040-B and SVA040-BV cameras. Windshield-mounted cameras cannot be reseated on their original adhesive after re...

An external omni-directional microphone for the CP4S with an 8 foot cable. The CP4S has an internal microphone, but an external unit can be placed ...

The mounting bracket for the SV7QLCD-T and SV7QLCD-T4 in-cab monitors. A replacement for the U-type bracket supplied with the monitor, or a second ...

An adapter cable required to use the INT1-PC-OBD power cable with a CP4S. Without it the two are not directly compatible. Adapts INT1-PC-OBD to CP4...

A pair of LTE blade antennas for the CP4S. Ground plane independent, so they work mounted to fibreglass or composite panels as well as metal. Two s...

The four-channel camera input cable for the CP4S, terminated with 4-pin plastic Type B connectors. One ships in every CP4S box; order this as a rep...

The remote control and panic button for the CP4 and CP4S, with LED status indicators showing recording and network state at a glance. One ships in ...