Products

A 128GB micro SD card for the KP2. Storage capacity determines how long a system records before overwriting, so sizing it to your retention require...

The Aviator-connector version of the 5m camera cable, for installations built around legacy Aviator camera hardware rather than the newer Type B pl...

The standard 5m camera cable for CP4S and CRX-S installations. Every bare SVA camera requires one of these to reach the recorder; the -5B kit versi...

A 15m camera cable for runs the standard 5m cannot reach: rear-mounted cameras on box trucks and buses, cargo-area domes, and any position at the f...

Mounts to drawers using pre-cut holes Flows 95 CFM Kit includes fan and 2 screens Works with PKG-TTP-INUT-1201-4

Includes 12V bright LEDs Rotates 180 degrees Features on/off switch

12" accessory pocket w/hinged lid & lock Internal mounting Fits 6" deep or deeper consoles Double check console Side View Depth Measurements to...

Accessory pocket fits between extrusion of 3.3"W section of Havis C-VSW and C-W wide consoles 12" long accessory pocket Provides storage space for ...

12" enclosed 25° angled Series Heavy-duty angled console 8.375" high, 9" wide, 16.75" length, max. depth 9.25", min. depth 3.5" 2 piece housing des...

Use in 3.3"W section of Havis C-VSW & C-W Series consoles to increase mounting space Optimizes equipment mounting space and layout Hardware inc...

Visit our Heavy-duty mount configurator for information on a complete system. Heavy-duty telescoping pole with precision machined solid billet alum...

Visit our Heavy-duty mount configurator for information on a complete system. Heavy-duty telescoping pole with precision machined solid billet alum...

This 13.3-inch touch-screen provides a wide view display and a five-point capacitive touch screen integrated with a wide range of functionality and...

13" accessory pocket w/hinged lid & lock Internal mounting Fits most 10" deep or deeper consoles Double check console Side View Depth Measureme...

Accessory pocket fits between extrusion of 3.3"W section of Havis C-VSW and C-W wide consoles For use with the following consoles C-VSW-3000-F150-2...

Features: Mounts to any MCS top plate (7160-0085 or 7160-0086) Works with bucket seat configurations No-drill, easy-to-install solution Can hold 4...

Use in 3.3"W section of Havis C-VSW & C-W Series consoles to increase mounting space Optimizes equipment mounting space and layout Hardware inc...

The 13″ Low Profile Ergonomic Console Box is ergonomically designed to provide two mounting positions for motion devices on the top of the console ...

The 13″ Lower Tube Assembly is designed to attach to the vehicle base of a pedestal system and give your solution up to 18.25″ of height adjustment...

Power your PocketJet or RuggedJet series printer directly from your vehicle’s battery with this wired car adapter. A long, 14ft cable allows flexib...

This single replacement lens fits the Bayco SL-1512, SL-1514, and SL-1522 LED work lights and Nightstick NSR-1514 Series and Nightstick NSR-1516 Se...

Convenient carry case for NSR-1514C scene light and tripod kit contents. Protects and securely stores items for transport or shipping. Foam-lined c...

The 1514-TRIPOD is for use with the LED Scene/Area Lights. This tripod features retractable folding legs and extends up to 6’ using 2 adjustable ca...

Long swing arm mounting device Recommended for the fire market or any application where a longer overall length and slide function would be desired...

Alternate selection designed with narrow base plate for applications where counter space is limited - such as behind weigh scales on cash lanes Inn...

Recommended selection and includes a 4" diameter round base with cover Innovative cable management hides and protects cables within the poles 1.75"...

16 inch tube Mounting pedestal with adjustable height from 16" to 29.5" Any Havis base plate can be mounted to base of tube Any Havis motion device...

Gusseted base floor mount tube Mounting pedestal adjustable from 16 inches to 29.5 inches with machined clamp collar and locking handle Designed wi...

Visit our Heavy-duty mount configurator for information on a complete system. Heavy-duty telescoping pole with precision machined solid billet alum...

Weight 15.0 lbs. / 6.8 kg Height 8.75 - 12.0 in / 22.2 - 30.5 cm Width 9.0 in / 22.9 cm Depth 17.0 in / 43.2 cm Features: No-drill, easy-t...

This portable micro-USB external single battery charger is designed to recharge a non-proprietary 18650 lithium-ion rechargeable battery (4700-BATT...

Light and medium truck consoles (SUV & full size only) A vehicle mounting kit is required and must be ordered separately (C-TMW Series or C-M-S...

Enclosed Series consoles for applications with limited space A vehicle mounting kit is required and must be ordered separately (C-TMW Series or C-M...

Create versatile POS and Workstation device mounting solutions for Retail, Hospitality, Healthcare, Workplace & Warehouse markets 1.75" diamete...

Configure Your Prisoner Transport Solution 1994-2014 Ford E-Series rear permanent step assembly Rear permanent step assembly For 1997-2014 Ford E-S...

Configure Your Prisoner Transport Solution Chevrolet G-Series or Ford E-Series Van rear permanent step assembly Rear permanent step assembly For Ch...

Configure Your Prisoner Transport Solution Chevrolet G-Series side step assembly Side step assembly For Chevrolet vans Provides safe entry and exit...

Weight Weight: 3.40 lbs / 1.5 kg Height Height: 4.62 in / 11.7 cm Width Width: 16.5 in / 41.9 cm Depth Depth: 8.0 in / 20.3 cm Features: I...

Features: Black powder coat finish for maximum corrosion resistance Won't interfere with levers or factory-installed consoles located on transmiss...

Features: Angled step moves pole away from passenger leg space and attaches to the Lower Pole without any protruding edges One Offset Universal Mo...

Features: Legs attach to both short and long MCS Top Plates (7160-0085 or 7160-0086) Leveling rear leg provides increased stability Can be used in...

Features: New rear leveling leg provides increased stability Legs attach to both short and long MCS Top Plates (7160-0085 or 7160-0086) Heavy gaug...

Standard passenger side mount package for 1999-2016 Ford F-250-F-450 pickup, F-550, 2011-2023 F-650, F-750 Chassis Cab, & 1999-2005 Ford Excurs...

A 1TB SDHC card for the CP4S. Storage capacity determines how long a system records before overwriting, so sizing it to your retention requirement ...

A 1TB removable 2.5" SATA solid state drive for the CRX-S. The drive slots into the recorder's removable caddy, so evidence can be pulled from a ve...

1″ Filler Plate

Use in 3.3"W section of Havis C-VSW & C-W Series consoles to increase mounting space Optimizes equipment mounting space and layout Hardware inc...

2″ filler panel for Gamber-Johnson console boxes