xirgo

A 128GB SDHC card for the CP4S and CRX-S. Storage capacity determines how long a system records before overwriting, so sizing it to your retention ...

A 128GB micro SD card for the KP2. Storage capacity determines how long a system records before overwriting, so sizing it to your retention require...

The Aviator-connector version of the 5m camera cable, for installations built around legacy Aviator camera hardware rather than the newer Type B pl...

The standard 5m camera cable for CP4S and CRX-S installations. Every bare SVA camera requires one of these to reach the recorder; the -5B kit versi...

A 15m camera cable for runs the standard 5m cannot reach: rear-mounted cameras on box trucks and buses, cargo-area domes, and any position at the f...

A 1TB SDHC card for the CP4S. Storage capacity determines how long a system records before overwriting, so sizing it to your retention requirement ...

A 1TB removable 2.5" SATA solid state drive for the CRX-S. The drive slots into the recorder's removable caddy, so evidence can be pulled from a ve...

A 256GB SDHC card for the CP4S. Storage capacity determines how long a system records before overwriting, so sizing it to your retention requiremen...

A 256GB micro SD card for the KP2. Storage capacity determines how long a system records before overwriting, so sizing it to your retention require...

A 2TB removable 2.5" SATA solid state drive for the CRX-S. The drive slots into the recorder's removable caddy, so evidence can be pulled from a ve...

A 32GB SD card for the CP4S and CRX-S. Storage capacity determines how long a system records before overwriting, so sizing it to your retention req...

A 4TB removable 2.5" SATA solid state drive for the CRX-S. The drive slots into the recorder's removable caddy, so evidence can be pulled from a ve...

A 512GB SDHC card for the CP4S. Storage capacity determines how long a system records before overwriting, so sizing it to your retention requiremen...

A 64GB SDHC card for the CP4S and CRX-S. Storage capacity determines how long a system records before overwriting, so sizing it to your retention r...

A 64GB micro SD card for the KP2. Storage capacity determines how long a system records before overwriting, so sizing it to your retention requirem...

A commercial-grade 7" in-cab monitor that turns a recorder into a live driver aid. Wired to the video output of a CP4S or CRX-S, it gives the drive...

The four-channel version of the 7" in-cab monitor, with a separate alarm trigger for each channel. Where the single-channel model shows one view, t...

A converter for mixed-generation installations, taking a 4-pin female Aviation connector to a 4-pin female DIN. Use it where an Aviator camera need...

A short adapter that converts an Aviator male connector to a Type B male, letting Aviator-terminated cabling connect to newer Type B camera hardwar...

A splitter that takes one Aviation camera cable run and feeds two cameras from it. Useful where two cameras sit close together at the far end of a ...

The external GPS and GLONASS antenna module for the CP4 and CP4S. The recorder relies on this module for positioning, so a failed or damaged unit m...

The mounting bracket for the CP4 and CP4S recorder. One ships in every CP4S box; order here as a replacement or where a second mounting position is...

The power harness for the CP4 and CP4S, carrying battery positive, ignition positive and battery negative. One ships in every CP4S box; order here ...

The remote control and panic button for the CP4 and CP4S, with LED status indicators showing recording and network state at a glance. One ships in ...

The video and audio output harness for the CP4 and CP4S, carrying the video-out feed to an in-cab monitor plus the RPM, speed and alarm I/O trigger...

The CP4S is a compact cloud-connected mobile DVR that records up to four HD cameras plus full telematics data. Built for North American fleets on 4...

The Wi-Fi version of the CP4S 4-channel HD vehicle recorder. Identical in recording capability to the cellular model but without the LTE modem, it ...

An adapter cable required to use the INT1-PC-OBD power cable with a CP4S. Without it the two are not directly compatible. Adapts INT1-PC-OBD to CP4...

A pair of LTE blade antennas for the CP4S. Ground plane independent, so they work mounted to fibreglass or composite panels as well as metal. Two s...

The four-channel camera input cable for the CP4S, terminated with 4-pin plastic Type B connectors. One ships in every CP4S box; order this as a rep...

A tamper-resistant steel locking enclosure for the CP4S. The recorder mounts inside and the enclosure locks, which matters on vehicles where a driv...

An external omni-directional microphone for the CP4S with an 8 foot cable. The CP4S has an internal microphone, but an external unit can be placed ...

A 4G LTE USB modem that adds cellular connectivity to a CRX-S, enabling real-time event notification and remote video access. North American bands....

A four-camera wiring harness for the CRX-S using 4-pin Type B connectors. The CRX-S supports eight cameras and ships with two of these harnesses; o...

The digital I/O and video output cable for the CRX-S, carrying the monitor feed and the alarm trigger lines that drive automatic camera channel swi...

An external case for the USB LTE modem used with a CRX-S, supplied with a USB cable and two 3M adhesive pads. It lets the modem mount away from the...

The external GPS and GLONASS module for the CRX-S, housed in a weatherproof case for exterior mounting where cab glass or bodywork would block rece...

The power cable and harness for the CRX-S. One ships in every CRX-S box; order here as a replacement or a spare where the original was shortened or...

A supercapacitor and battery backup that gives the CRX-S enough power to shut down cleanly when vehicle power is cut. Without it, an abrupt power l...

A USB Wi-Fi modem for the CRX-S. For return-to-base fleets, this offloads event video when the vehicle comes back to a covered depot, removing the ...

The CRX-S is Xirgo's 8-channel mobile NVR for vehicles that need more coverage than a four-camera system can give. Built for municipalities, school...

The high-capacity CRX-S configuration, shipping with a 2TB removable SSD for fleets that need longer continuous retention across all eight channels...

The Aviator wiring loom for the CRX-S. The recorder ships with Type B camera inputs as standard, so if you are carrying over legacy Aviator cameras...

The driver-facing camera module that unlocks Driver State Monitoring on the KP2. It snaps directly onto the KP2 body with no additional cabling or ...

A compact driver-facing camera for CP4S and CRX-S systems, mounted to the windshield with the supplied 3M adhesive pad. At 103g it is the lightest ...

The SVA050-A driver-facing camera supplied as a complete kit with its extension cable. Windshield mounted with the supplied 3M adhesive pad, with 6...

An external 4G/LTE/3G MIMO antenna with a 2.5m cable, for installations where the recorder sits somewhere the signal cannot reach. IP67 weather-res...

The hardwired KP2 power adaptor, connecting to constant power, ignition and ground rather than a diagnostic port. This is the professional install:...