Xirgo

An angled block wedge for KP2 installations in trucks with a split windshield. The wedge corrects the mounting angle so the camera continues to fac...

A 2m extension cable for the KP2, used where the standard cable run does not reach the chosen power source or the camera needs mounting further fro...

A cigarette lighter power adaptor for the KP2. The fastest possible installation and fully reversible, which makes it the right choice for leased v...

The driver-facing camera blank plate for the KP2. It fills the module bay on units running road-facing only, keeping dust and debris out. One ships...

A privacy cover for the KP2 driver-facing camera. It physically blocks the lens, which satisfies driver privacy requirements and union agreements i...

The KP2 installation tool, used for trim removal and cable routing during a windshield install. Installation tool for KP2 fitting For trim removal ...

A 2m extension for the KP2 remote interior cameras, doubling the standard 2m lead to 4m. For high-cab vehicles and split-windshield installations w...

The Xirgo IOX auto-pairing cable, connecting a KP2 or XVD-302 camera to a Geotab GO9 or GO10 telematics device. Auto-pairing means the two devices ...

The KP2 mounting bracket, supplied with a 2.73m cable. This is the assembly that holds the KP2 to the windshield, and it is a replacement part for ...

The simplest way to power a KP2: plug it into the vehicle's OBD-II port and the install is done. Voltage monitoring handles ignition detection and ...

The pass-through version of the KP2 OBD-II power cable. It powers the KP2 while keeping a female OBD-II port available, so a diagnostic tool or a s...

A wireless Bluetooth panic button for KP2 systems. Pressing it flags the moment as an event so the footage is preserved and uploaded rather than ov...

A remote driver-facing interior camera for KP2 installations where the snap-on module cannot be positioned effectively. Supplied with a 2m cable, i...

The no-infrared version of the KP2 remote interior camera. Functionally identical to the KP2-INTCAM-REM but with the IR LEDs omitted, which suits i...

Double-sided 3M adhesive tape for the KP2 mounting pad, supplied as a single piece. Use it when remounting a KP2 to the windshield after removal, s...

The KP2 replacement installation kit, containing the consumables used up during a fit: cable ties, a Torx key, alcohol preparation pads and 3M adhe...

The KP2 side plate kit, containing the side cover and the fasteners that secure it. The side cover protects the SD card slot, so a damaged or missi...

A replacement Torx key for the KP2. Required to open the side cover for SD card access, so a lost key means no card access on a deployed camera. To...

The KP2 is Xirgo's modular road-facing video telematics device, combining a 2MP HD dash camera, GPS tracking and 4G/LTE connectivity in a single wi...

The heavy-duty KP2 connection, for trucks and equipment with a J1939 nine-pin Deutsch port instead of OBD-II. Acts as a splitter, leaving an open J...

The LX40 Series is a scriptable vehicle telematics platform rather than a fixed-function tracker. Over 500 controllable parameters mean device beha...

The LX40 Series is a scriptable vehicle telematics platform rather than a fixed-function tracker. Over 500 controllable parameters mean device beha...

The LX40 Series is a scriptable vehicle telematics platform rather than a fixed-function tracker. Over 500 controllable parameters mean device beha...

The LX40 Series is a scriptable vehicle telematics platform rather than a fixed-function tracker. Over 500 controllable parameters mean device beha...

A mini dome camera for interior monitoring of cargo areas and passenger cabins. The low-profile dome housing sits flush against the ceiling where i...

A mirrored rear-view camera for reversing and backup applications, mounted on the bumper or above the rear doors. The mirrored image means the driv...

The SVA037-A mirrored rear-view camera supplied as a complete kit with its extension cable. Built for reversing and backup applications on the bump...

The mounting bracket for the SV7QLCD-T and SV7QLCD-T4 in-cab monitors. A replacement for the U-type bracket supplied with the monitor, or a second ...

A mixed-standard splitter for vehicles carrying both diagnostic types. Takes a female OBD-II input and provides one J1939 female and one J1939 male...

An OBD-II splitter that turns one port into two. Single male OBD-II connector into two female OBD-II connectors, so a KP2 and a second device can s...

A combined road and driver-facing camera in a single housing, giving two channels from one mounting point and one cable run. Useful where recorder ...

A windshield-mounted road-facing camera for CP4S and CRX-S installations, giving the forward view that anchors any multi-camera configuration. Moun...

The SVA045-AM road-facing camera supplied as a complete kit with its extension cable. Windshield-mounted with 3M VHB tape for fast installation, wi...

A side and rear add-on camera built for the mirror arm and sidewall positions on heavy commercial vehicles. The 1.3MP Sony sensor and 120° lens cov...

The SVA035-A side and rear camera supplied as a complete kit with its extension cable. The 1.3MP Sony sensor and 120° lens cover the blind spot alo...

A weatherproof side-view camera for exterior mounting on the sidewall or mirror arm of commercial vehicles. Rated IP69K against high-pressure washd...

The SVA027-A weatherproof side-view camera supplied as a complete kit with its extension cable. Rated IP69K against high-pressure washdown, it is t...

A 4m two-in-one extension built specifically for the SVA055 combination camera. Because the SVA055 carries both a road-facing and a driver-facing c...

The standard mounting bracket for all SVA035 cameras, including the accessory package version. A spare part for installations where the original br...

A tubular mounting bracket for attaching an SVA035 camera to the tube frame of a side mirror assembly. Mirror-arm mounting gives the best blind-spo...

A replacement 3M adhesive pad for SVA040-B and SVA040-BV cameras. Windshield-mounted cameras cannot be reseated on their original adhesive after re...

The complete tractor-trailer quick disconnect kit. Same trailer hook-up as the SVA-20TT-EXT-A but supplied with the adapter and converter cables in...

A trailer hook-up extension for tractor-trailer installations, letting a rear camera on the trailer connect to a recorder in the cab. Cables are sp...

A wired remote panic button for CP4S and CRX-S systems. Pressing it triggers an event recording, preserving footage around an incident that would o...

The XT53 is a battery-powered asset tracker with no wiring and no maintenance. A 19 Ah lithium thionyl chloride cell gives up to seven years of lif...